______________________________________________________________________________
CT
CENTR is a module which computes the x,y coordinates of an object by
means of a centroid calculation and calculates the full-width-half-
maxima along the major and minor axes of the ellipse. The boundaries of
the centroided area can be input manually, by the TV cursor, or from a
file. The results can be stored in a character file if desired.
______________________________________________________________________________
Enter an option: 22-SEP-2002 20:55:31.67
OPTION=CT
CENTR, Version 7
Open the SAD file to be measured
Enter the filename: (<CR> for default)
FILE=E022152
There is one map in the file
Reading from the file
512 rows of 320 pixels in R4 format
Enter a command:
AS = Position from cursor; SAOimage already loaded
S = Position from cursor; need to load SAOimage
M = Manual input of boundaries (default)
F = Boundaries from character file of type 2 prepared by option FI
COMMAND=AS
Do you wish to store the results? (default = Y)
STORE=
T ....The file will be 132 characters wide
Add the results to an existing file? (default = N)
OLD=
F
Enter the file name: (default = last entry)
FILE_22=CENTERS
Enter the object's ID (6 characters allowed): (\ to quit)
ID=1
Be sure SAOimage has focus; position cursor at the lower left corner and
press <CR>; then position the cursor at the upper right corner and press <CR>
Type 0 or Q to quit
Lower left: Cursor in image 1; file name = E022152
X, Y: on TV desktop = 146 301
X, Y: in frame = 108.500 233.000
X, Y: in map = 13.500 280.000
Upper right: Cursor in image 1; file name = E022152
X, Y: on TV desktop = 180 272
X, Y: in frame = 125.500 218.500
X, Y: in map = 30.500 294.500
Enter the position angle: (default = 0)
THETA=
0.000000E+00
Centroid = 21.563 286.845 Number of points = 71
FWHM in a = 5.993 FWHM in b = 5.703
Inclination = 0.00 Eccentricity = 0.307
Peak value = 1135.1001 Sky value = 481.74255
Enter code for each quadrant:
0 = Want it excluded
1 = Want it measured (default)
2 = Abort this object
QUADRANTS=
1
1
1
1
Enter the next object's ID (6 characters allowed): (\ to quit)
ID=2
Be sure SAOimage has focus; position cursor at the lower left corner and
press <CR>; then position the cursor at the upper right corner and press <CR>
Type 0 or Q to quit
Lower left: Cursor in image 1; file name = E022152
X, Y: on TV desktop = 294 455
X, Y: in frame = 182.500 310.000
X, Y: in map = 87.500 203.000
Upper right: Cursor in image 1; file name = E022152
X, Y: on TV desktop = 335 423
X, Y: in frame = 203.000 294.000
X, Y: in map = 108.000 219.000
Enter the position angle: (default = 0)
THETA=
0.000000E+00
Centroid = 97.152 211.053 Number of points = 77
FWHM in a = 7.441 FWHM in b = 7.022
Inclination = 0.00 Eccentricity = 0.331
Peak value = 1642.9060 Sky value = 476.72177
Enter code for each quadrant:
0 = Want it excluded
1 = Want it measured (default)
2 = Abort this object
QUADRANTS=
1
1
1
1
Enter the next object's ID (6 characters allowed): (\ to quit)
ID=\
Enter an option: 22-SEP-2002 20:57:08.80
OPTION=
______________________________________________________________________________